Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Isopropyl alcohol wipes
Pictorial placement guide
Heavy duty strength self adhesive
Non UK £35 shipping fee applies
1️⃣ Clean the flash head thoroughly.
Use alcohol or solvent. It must be completely free of residue and absolutely dry. It is very important not to skip this step
2️⃣ Peel the protective film carefully.
Position the Velcro tab accurately
3️⃣ Apply once — and only once.
Do not remove and reapply. If you lift it, the bond is compromised.
4️⃣ Press firmly and rub repeatedly.
Apply strong pressure and rub firmly to adapt the adhesive fully to the flash surface. Continue for 30 seconds for each piece
5️⃣ Wait 24 hours before attaching the diffuser.
This allows the adhesive to cure and bond properly. If these steps are not followed precisely, the tabs may detach. This is not an issue with the adhesive strength — it is purely application technique. Follow the protocol carefully as demonstrated, and they will stay secure.
Isopropyl alcohol wipes
Pictorial placement guide
Heavy duty strength self adhesive
Non UK £35 shipping fee applies
1️⃣ Clean the flash head thoroughly.
Use alcohol or solvent. It must be completely free of residue and absolutely dry. It is very important not to skip this step
2️⃣ Peel the protective film carefully.
Position the Velcro tab accurately
3️⃣ Apply once — and only once.
Do not remove and reapply. If you lift it, the bond is compromised.
4️⃣ Press firmly and rub repeatedly.
Apply strong pressure and rub firmly to adapt the adhesive fully to the flash surface. Continue for 30 seconds for each piece
5️⃣ Wait 24 hours before attaching the diffuser.
This allows the adhesive to cure and bond properly. If these steps are not followed precisely, the tabs may detach. This is not an issue with the adhesive strength — it is purely application technique. Follow the protocol carefully as demonstrated, and they will stay secure.